2A11Aluminum plate
Thickness:0.5-200mm
State:O、F、H、T
Quantificationally:3000kg
Typical application:Aircraft structural parts, connecting die forgings, propellers, propeller blades, etc.
Sales phone:
023-65802068Product introduction
The 2A11 products have good plasticity under annealing, new quenching and hot state, and can be enhanced by heat treatment. The aluminum clad plate has good corrosion resistance. Anodic oxidation treatment and coating can significantly improve the corrosion resistance of the product. The 2A11 quenched plate provided by the West Aluminum aluminum industry has been used in space, aviation, military and civil fields by the heat treatment process of continuous air cushion furnace.
Technical parameter
典型合金 | 2A11铝板 |
材料状态 | O、F、H、T |
厚度(mm) | 0.5-200 |
宽度(mm) | 1000-2500 |
长度(mm) | 2000-10000 |
典型产品 | 飞机结构件、连接模锻件、支柱、螺旋桨叶片等 |
The packing method of aluminum plate:
1. Foil or laminating the aluminum sheet to ensure that the surface of the aluminum sheet is intact without scratching.
2, the plastic or kraft paper package is used to prevent moisture and rain, to ensure that the aluminum plate is clean and free of dirt during the transportation process (each package has moistureproof desiccant to ensure the quality of our products in East China and Southern China).
3, add wooden support and steel belt reinforcement to avoid collision in transportation process and ensure aluminum plate geometry unchanged.
4. Export products are packed in wooden boxes and brackets with fumigation marks.
5, packaging according to other packaging requirements of customers.
The packing method of the strip:
1. When the width of the strip is not larger than 500mm and the coil diameter is not greater than 500mm, after wrapping 1~2 layers of kraft paper outside, it will be packed with adhesive label.
2, when the width of the strip is not more than 500mm and the roll diameter is more than 500mm, the outer layer is wrapped with bamboo sheet, fiber board or cardboard after wrapping 1~2 layers of kraft paper and a layer of plastic cloth, and the vertical or horizontal tray is packaged in series, and the vertical (or lying) tray is used.
3, when the width of the strip is greater than 500mm and the roll diameter is more than 500mm, the 1~2 layers of kraft paper and a layer of plastic cloth are wrapped, and the outer layer is packed with a bamboo mat, or the fiberboard is wrapped by a vertical or horizontal tray frame.
Product application
Aircraft structural parts, such as skeleton parts, connecting die forgings, propellers, propeller blades, bolts, rivets, etc.
Tel:023-65802068
023-65802326
Mailbox:sales@cqswa.cn
QQ: 1045712113