Aluminum alloy profiles for solar cell frame
Alloy:6005、6063A、6R63、6463、6060、6061、6063
State:T5、T6、T66
Quantificationally:1000kg
Technical standard:YS/T773-2011
Sales phone:
023-65802068Product introduction
As a new type of inexhaustible pollution-free green energy, solar energy is one of the seven new emerging industries in China. Its battery plate frame and its supporting structure, such as pillar, pull rod, supporting leg, etc., can be extruded with the present economical and durable aluminum alloy materials. It is a new market for the application of aluminum alloy materials. And it has been applied worldwide. Practice has shown that the use of 6063 aluminum alloy has become an important choice for producing high-precision PV aluminum alloy profiles. The 6063 aluminum alloy Al-Mg-Si system can be heat-treated to strengthen the aluminum alloy. The alloy strengthening phase is Mg2Si. It has good extrusion property and low quenching sensitivity, high temperature plasticity, wide quenching temperature range and small critical quenching speed. In the range of 6063 aluminum alloy components stipulated in the national standard GB/T3190, different material properties will be obtained. In order
Technical parameter
牌号、状态、表面处理方式
合金牌号 | 状态 | 表面处理方式 |
6005、6063A、6463、6R63 | T5、T6 | 阳极氧化、电泳涂漆 |
6060、6063 | T5、T6、T66 | |
6061 | T6 |
精度等级 | A面纵向侧弯度,不大于 |
Ⅰ级 | 任意2m长度内:1.0mm |
Ⅱ级 | 任意2m长度内:0.5mm |
精度等级 | B面纵向侧弯度,不大于 |
Ⅰ级 | 任意2m长度内:2.0mm |
Ⅱ级 | 任意2m长度内:1.5mm |
Introduction of equipment
It has 8000 tons of hydraulic press, 12500 tons horizontal extruder, 1500 ton stretcher, high-speed belt saw, quenching furnace, aging furnace and finishing equipment, with an annual production capacity of 12000 tons.
Tel:023-65802068
023-65802326
Mailbox:sales@cqswa.cn
QQ: 1045712113